Our Design Partner, FMA Direct

Our in-house staff of engineers is constantly at work developing new products, and improving existing designs for the R/C industry.

css3menu.com
  CP10XP_Calculator.xls
Please fill all required fields
    Cellpro 10XP and Power Supply Information        
    Frequently Asked Questions        
    Question 1
    At what level should I set the Power Supply Input Current Limit on the Cellpro 10XP?
    Answer:
    Set the Power Supply Input Current Limit to the maximum continuous amperage rating of your power supply or slightly lower
    Question 2
    At what level should I set the Power Supply Input Low Voltage on the Cellpro 10XP?
    Answer:
    If you are powering Cellpro 10XP with either a 12V or 24V Lead Acid Battery, set the Power Supply Low Voltage Setting to 11V or 22V respectively
    If you are powering Cellpro 10XP with an AC/DC power supply, set the Power Supply Low Voltage setting to 90% of the rated output voltage; however,
    if you experience low voltage cutout warnings, it may be due to brief input voltage dropouts. Try lowering the LVC level incrementally and re-try.
    Question 3
    What are the minimum power supply specifications that will enable me to take full advantage of Cellpro 10XP's full power capabilities?
    Answer:
    Power Supply Voltage (V) 32
    (Cellpro 10XP will accept up to 32V input, but power is not improved above 30V input)
    Power Supply Current (A) 25
    (Power supply output current capability can exceed 40A, but power will not be improved)