Our Design Partner, FMA Direct

Our in-house staff of engineers is constantly at work developing new products, and improving existing designs for the R/C industry.

css3menu.com
  DPL8_Calculator.xls
Please fill all required fields
    Dual PowerLab (8x2) and Power Supply Information      
    Frequently Asked Questions        
    Question 1
    At what level should I set the Power Supply Input Current Limit on each of the Dual PowerLab (8x2) channels?
    Answer:
    Set the Power Supply Input Current Limit to the maximum continuous amperage rating of your power supply or slightly lower
    Question 2
    At what level should I set the Power Supply Input Low Voltage on each channel of the Dual PowerLab (8x2)?
    Answer:
    If you are powering Dual PowerLab (8x2) with either a 12V, 24V, or 48V Lead Acid Battery, set the Power Supply Low Voltage Setting to Auto
    If you are powering Dual PowerLab (8x2) with an AC/DC power supply, set the Power Supply Low Voltage setting to 90% of the rated output voltage; however,
    if you experience low voltage cutout warnings, it may be due to brief input voltage dropouts. Try lowering the LVC level incrementally and re-try.
    Question 3
    What are the minimum power supply specifications (per channel) that will enable me to take full advantage of Dual PowerLab (8x2)'s full power capabilities?
    Answer:
    Power Supply Voltage (V) 39.53
    (Dual PowerLab (8x2) will accept up to 48V input, but power is not improved above 39.53V input)
    Power Supply Current (A) 40
    (Power supply output current capability can exceed 40A, but power will not be improved)