Our Design Partner, FMA Direct

Our in-house staff of engineers is constantly at work developing new products, and improving existing designs for the R/C industry.

css3menu.com
  PL6_Calculator.xls
Please fill all required fields
    PowerLab 6 and Power Supply Information        
    Frequently Asked Questions        
    Question 1
    At what level should I set the Power Supply Input Current Limit on the PowerLab 6?
    Answer:
    Set the Power Supply Input Current Limit to the maximum continuous amperage rating of your power supply or slightly lower
    Question 2
    At what level should I set the Power Supply Input Low Voltage on the PowerLab 6?
    Answer:
    If you are powering PowerLab 6 with either a 12V or 24V Lead Acid Battery, set the Power Supply Low Voltage Setting to Auto
    If you are powering PowerLab 6 with an AC/DC power supply, set the Power Supply Low Voltage setting to 90% of the rated output voltage; however,
    if you experience low voltage cutout warnings, it may be due to brief input voltage dropouts. Try lowering the LVC level incrementally and re-try.
    Question 3
    What are the minimum power supply specifications that will enable me to take full advantage of PowerLab 6's full power capabilities?
    Answer:
    Power Supply Voltage (V) 30
    (PowerLab 6 will accept up to 32V input, but power is not improved above 30V input)
    Power Supply Current (A) 40
    (Power supply output current capability can exceed 40A, but power will not be improved)