Our Design Partner, FMA Direct

Our in-house staff of engineers is constantly at work developing new products, and improving existing designs for the R/C industry, as well as commercial and military clientele.


Co-Pilot II Display Software supports Windows 7 or higher, most popular browsers, and installs from the Revolectrix website. The purpose of this software is to replace all of the functionality of the available IRNet Handheld Programmer using a Windows PC. In order to physically interconnect the CPII to a PC, a separate PC USB Interface is required; REVO PN: FUIM3.

IMPORTANT: If you have a dial up connection and you use a dial up accelerator, disable it before proceeding. After installation, you may also need to disable it any time you launch the CPII Charge Control Software in order to receive updates without problems.

To install the CPII Display Software, click:

Install CPII Display Software

The above link to the installer program will first check your computer for Microsoft .NET. If it is not already present, it will automatically install the latest version from the Microsoft website. After .NET is installed, the CCS will install and launch.

After the Software launches:

1) Connect the USB plug of the FUIM3 PC USB interface into any available USB port. Windows 7 or higher will automatically detect the device and install the correct driver.

2) In the Application, make sure "Comm:" is set to "Auto".

3) Refer to the CPII User Guide for instructions on using this utility.

  © 2010 Revolectrix Once the software is installed, it will automatically check the Revolectrix website for updates every time it is started.